Super Welder Kit with Pausing and Glowing Iron effects. Sound option also available.

Comment at the Big E train Show in Springfield, MA:

"This is the most realistic welder kit I have ever seen"

Micro processor controlled special effects of pausing and also glowing iron in weld puddle. When power is applied the micro controller starts a welding sequence that flashes a bright while LED to simulate welding flashes. After a period of time the welding stops, like when the electode is pulled away from the molten pool of weld metal. The micro controller slowy increases the brightness of the Amber LED to simulate the metal getting hotter. When the welding stops, the Amber LED is at its brightest and then slowly fades in color simulating a cool down of the material. The Micro controller then pauses the action for a while, then repeats the process. The welding varies slightly during operation to make it more realistic. A great addition to any welding scene, factory, contruction site, gas station or any type of repair scene. Select the sound add on for even more realism in your scene. An optional FK602 amplifier kit is also available if you need more volume (large room or noisy enviroment)

Features:

Small Compact Circuit
MicroComputer IC controlled with Welding Program Installed
Simulated Welding with Pausing
Glowing Amber LED to simulated glowing iron cooling down after welding stops.
Great for Blacksmith shop
IC can be reprogrammed or changed to run additional programs
High Quality Circuit Board
Voltage Regulator include in circuit
IC Socket to easily change MicroComputer Chip
12" Leads for LEDs and Power Input
Reverse Polarity Protected Circuit
Circuit is expandable as new options become available
Custom Programs can be added
White & Amber 3mm Super Bright LEDs included

Options:

Welding Sound add-on option with 2" speaker & instructions
Assembly by Bakatronics
5mm White LED
Plastic Enclosures
Custom welding rates & Sequences
Other Color LEDs
9 Volt Battery Clip
On Off Switch
HO & N Scale Welding Figures & Equipment

The completed circuit board is 3/4" wide, 2" long and about 1/2" high.

The kit comes complete with Circuit Board, Components, 2 Super Bright  3mm LEDs (1 white, 1 amber) a Pre-Programmed MicroController IC, 12" LED and Power leads and Assembly Instructions. This kit requires soldering to assemble the kit. A 15-30 watt soldering iron is recommended.